![The Board Woodworker](/img/default-banner.jpg)
- 202
- 1 333 374
The Board Woodworker
United States
Приєднався 8 бер 2011
Welcome to my channel! My name is Brian and I have a passion for woodworking. On my channel you will find all types of things like woodworking as well as cooking and truck content.
I have been working with wood my whole life starting with my father mentoring me as a young boy. I hope to share all of my knowledge with the world so that the craft of woodworking carries on. I will have a variety of content on my channel that will include projects, tips, and tricks. I will also have a variety of different kinds of wood. A few of my favorite species of wood are Purpleheart (Peltogyne), Claro Walnut (Juglans hindsi), and Cherry Wood (Prunus serotina). There are many different types of tools needed with these projects. I will have videos on a few of these tools so that you may better understand their purpose and how to use them. I will also review the tools to help you get a better idea of their quality, features, and functionality. Thank you for stopping by and see you in the shop.
I have been working with wood my whole life starting with my father mentoring me as a young boy. I hope to share all of my knowledge with the world so that the craft of woodworking carries on. I will have a variety of content on my channel that will include projects, tips, and tricks. I will also have a variety of different kinds of wood. A few of my favorite species of wood are Purpleheart (Peltogyne), Claro Walnut (Juglans hindsi), and Cherry Wood (Prunus serotina). There are many different types of tools needed with these projects. I will have videos on a few of these tools so that you may better understand their purpose and how to use them. I will also review the tools to help you get a better idea of their quality, features, and functionality. Thank you for stopping by and see you in the shop.
Welcome Back
Welcome to the channel my name is Brian and today we will be walking through our new house with my wife Kourtney, things will be changing inside soon so stick around and enjoy the ride. This will be one of many videos coming soon.
Thanks for watching
Thanks for watching
Переглядів: 367
Відео
COVID-19 TESTING DON'T BE AFRAID IT COULD SAVE LIVES
Переглядів 2334 роки тому
Todays video is me going to a new jersey testing center for the covid-19 virus. i have had direct exposure of the virus during its incubation period. Yes i am HIGH RISK AND YES I AM SHOWING SIGNS. I know people that have lived and people the were not so lucky. i have had to change my life by alot and i hope you stay safe.
Underseat Storage
Переглядів 1804 роки тому
Good afternoon welcome to the channel today's video is a little bit different. This is something that bothers me about Toyota why cant we get better storage like other car company's.
New vehicle is here
Переглядів 1344 роки тому
today you will see me take delivery of a new vehicle. it is a little bit different than what you would think. hope you enjoy and see you on the next video.
How To Make Custom Size Spade Bit
Переглядів 4,4 тис.4 роки тому
Hello and welcome to the channel. Today's video is about how to sharpen/resize a spade bit. I needed to make this bit a hair small for a custom project for a client, so what do you do you make it. Thanks for watch and don't forget to get and your shop and bring your idea to life.Don't forget to SUBSCRIBE and turn on notifications for my latest videos. See you on the next video.
Walnut Resaw
Переглядів 3144 роки тому
Hello and welcome to the channel. Today's video is the start of a project that i am working on for a client of mine, First thing i need to do is resaw this pc of walnut so i can get 2 even pieces of wood that will eventually be the two faces of a magnetic knife rack.Hope you enjoy the video and dont forget to like comment and subscribe. Also dont forget to follow me on instagram for more pictur...
Sunpak 19 inch BI Color LED Light Ring
Переглядів 20 тис.4 роки тому
Hello and welcome to the channel. Today's video is about a Sunpak 19 in BI-COLOR ring light. I have to say and you will see yourself at the price point (around $100)it is an amazing light. Some of the features that i love about this light is that it can all be stored in no time in the provided bag. Other features that it has are listed below. Don't forget to subscribe to the channel so you can ...
ULNAR TRANSPOSITION POST OP DAY 4
Переглядів 1,1 тис.4 роки тому
Hello and welcome to the channel. Today's video is day 4 post op after my Ulnar nerve transposition surgery. A few of the discomforts i was having had to do with swelling in my arm, and in return putting pressure on the recently transposed nerve. overall after releasing pressure from the wrap, i was able to elevate a lot of the discomfort. DO NOT DO ANYTHING WITHOUT CONSULTING YOUR SURGEON. If ...
Day 1 Post Ulnar Transposition Surgery
Переглядів 14 тис.4 роки тому
Hello everyone, welcome and thank you for watching. Today's video is about my recent surgery (ulnar nerve transposition). This video's content is us re-wrapping my arm from the initial surgery so that I can get better blood flow and reduce the numbness in my fingers. All is well with the expected process of recovery. Thank you again for all of your support!
Racks On Racks On Racks
Переглядів 684 роки тому
Hello and welcome to the channel, today is the day that i get my wall of wood. i did this video for not only safety but also for being organized. today i used my bosch laser level to set the hangers and align them. hope you enjoy and enjoy the video. dont forget to hit the notification bell for more videos. if there is a video you want me to do let me know in the comments.
Baseus vent clip phone holder(magnetic)
Переглядів 39 тис.4 роки тому
Baseus vent clip phone holder(magnetic)
How To Replace A Damaged Piece Of Siding
Переглядів 9 тис.4 роки тому
How To Replace A Damaged Piece Of Siding
How to install GTR lighting HID fog lights in Toyoa Tundra
Переглядів 9394 роки тому
How to install GTR lighting HID fog lights in Toyoa Tundra
How To Make A Larger Base For Your Router
Переглядів 19 тис.5 років тому
How To Make A Larger Base For Your Router
First look And Assembly Of Makita String Trimmer
Переглядів 14 тис.5 років тому
First look And Assembly Of Makita String Trimmer
LED REVERSE LIGHTS FOR 2016 TOYOTA TUNDRA 1794
Переглядів 1,1 тис.5 років тому
LED REVERSE LIGHTS FOR 2016 TOYOTA TUNDRA 1794
LED Interior Lights For 2016 tundra 1794
Переглядів 8895 років тому
LED Interior Lights For 2016 tundra 1794
Nordfab dust collection ducting install
Переглядів 6 тис.5 років тому
Nordfab dust collection ducting install
I sufficiently heated my stainless steel pan for 3-5 minutes first on medium heat and test w water ensuring that the water beads on the pan. When I add the butter to olive oil or just butter alone, it burns and turns brownish/black.
They used a lot of self adhesive tape. My gosh! No wonder you had swelling and pain.
Is that extruded or cast acrylic? Cast acrylic usually has a slight thickness variance just an fyi
If you cut the square notch larger than on the original base , you can use the square guide , the hole should have been cut last with a router bit which would have given you a perfect centre, good video overall .
My dog does this since turning 10, he shakes so bad and hyperventilates and nothing will calm him down.
Im 5 days post surgery & can't sleep due to the burning & numbness
Tammy, I see your comment here is new. I just had a transposition done 3 weeks ago. It's taken me all of 3 weeks for the burning and pain to start going away, but it is definitely getting better now if that is any consultation.
1 or 2 more eggs couldve taken care of the butter burning too 😊 That would add different timing and less room for movement too though. Then theres me, I dun like using a spatula so I use a stainless steel fork right now 😅 I like to keep things minimal as possible 😆
I spoon fat over the top of the eggs to cook the top at the end.
Poor baby
The whole point of the instructions was to let you know that you needed to remove the dealer installed floor mats. That was a question I had that the instructions addressed. They did not think someone would remove the factory installed carpeting, but they are pointing out that you need to install their mats over factory installed carpeting. One person had vinyl instead, and it won't work on that. It probably would damage the vinyl. Also, they are making a clear distinction between mats and carpeting. That aspect of the instructions was extremely clear and not to mock. Most instructions are lousy and do not anticipate reader's needs and the clarity of their instructions. Also, the instructions on the website say: NEXT, REMOVE ANY EXISTING FLOOR MATS AND INSTALL THE LINERS, POSITIONED AS SHOWN ABOVE. TAKE CARE THE DRIVER’S SIDE LINER IS SECURED TO THE FACTORY FLOOR MAT RETENTION POSTS. They do not say to remove those like your instructions do. I've watched a lot of videos and no one took those off. Your video is five years old. Maybe the newer mats are different than the older ones.
04/05/24- 07 Tundra MPG 19.3 After Refuel Mileage 144092- 68 MPH Only Limited By Ones Imagination! Grouchy Old Vet!
Nice DIY. Thank you sir
3:49
Just use water test
Not sure why you lined the laser in the middle of the painters tape. Surely the edge of the tape makes a straighter line?
Go Courtney! Not only is she a willing and strong helper, she knows how to get close to a heavy load and lift with her leg muscles - thereby preventing a back injury. Not many of her caliber out here. (The engine hoist in my shop will have to help with the lifting, but it's a very poor companion the rest of the time.) Was also nice to see how the unit arrives when delivered. It helped me to hear the hollow sound of the base when you slapped the top. Until seeing this vid, I wasn't sure how that part was constructed. Clearly, the heavy part of this machine is the upper cast section. Thanks for posting.
looks like steamed shrimp curry, boo
Omg I'm in tears.. my dog is doing similar things.. not breathing like this.. but the rapid head movement.. restless..ect...
Did you ever figure it out? My 2015 1794 is doing the same thing. Front drivers side sensor goes off anytime I’m driving less than 5mph even when there is nothing in the way. I’ve swapped out sensors so I think it’s just a computer issue! Please help! Thanks
That's a reverse sneeze
i need to do this to mine, i should be able to find plexiglass at hobby lobby...
Looks great!! What fish spatula brand are you using?
Try using Ghee instead of butter... has a much higher smoke point. You won't have to worry about milk solids burning.
Woman 😂😂😂, she is on another planet 🎉🎉🎉
Crappy mic or no mic
Thanks for this. My grandads dog did this today in the car and she thought he’d left her. I thought she was just sneezing but I think her being in the car with me might have reminded her when she was rehomed so she got a bit worried bless her.
Great Video, Really helped me out with my strimmer, Thanks for taking the time.
Why would you do a 20 minute video on scrapple and not use REAL Habbersett pork scrapple? Our beef scrapple never really sold and was discontinued but Jones Dairy brought it back. You also cut the slices wrong.
Just installed my bar. Your U-Bolts are no where near tight enough.
A little lose? 😂 How about torque specs?
That was great! I have the same kind of damage next to a door.
If you add a bit of olive oil to the butter the butter won't burn.
Theft features outweigh a stolen truck….
What a bunch of crap that all was. Laughing so much looking back at all this. Just how scared people were and just absolutely did what they were told. Cause they were told.
Loved the video!
Mine won't start with the key....can u help me and tell me why...
If you closed the grill they would have cooked more even and faster.
I had it done 20 years ago. Getting ready to have it done again
Why????
Cool car, i like it
I hate to tell you, but these are called reverse sneezes. Poor dog is getting meds for something he doesn’t need. Look it up, you’ll thank me.
over easy is too unreliable for me. I go for sunny side up now.
Rob Pan deutza
🙏🏻
get a new plate
I just experienced this this morning. I thought he was choking on something and I didn’t know what to do. I got him out of his crate and he started to do better.. is there anything I can do? Only reason he was in his crate is because he can’t sleep with me on the bed or he pees on it. He’s only 7 months.
Absolutely no brown on the eggs, yuk
ua-cam.com/video/deSZka-j0Y0/v-deo.html
I know it’s been a while but thank you for sharing this… my dog has been doing this recently since my husband went on a military deployment, but I initially thought it was respiratory so I took her to her regular vet. There was nothing wrong, but the vet told me what I was describing could be allergies. I’ve been giving her medicine for a while now but it has not helped. It’s so random too. Nothing in particular triggers it, something is just wrong but she can’t communicate. I started to wonder anxiety because I get sort of like that too when I panic. I will get a thought so random for no reason then this strong feeling that something is very WRONG washes over me and I start breathing faster, but not audibly. This video made me remember that years ago when I went on a work trip for a few days, my husband told me that Cookie (our doggie) was doing some weird kind of sneezing/huffing. When I got home the next day it stopped completely so I never was able to witness it myself. Idk what to do, but there is a veterinarian’s office in my area that has a specialist in behavior (almost like a psychologist) so I will start there. Again, thank you for sharing .
They aren’t even comforting her… It’s not like it can say if it’s ok or not.. clearly not.
Too burned for me.